817-617-9225
Eaton offers a full range of innovative, reliable surge protection solutions to protect against the damaging effects of lightning, utility switching, switching electric motors, and more. Each product is independently tested and backed by the largest engineering and technical support in the industry.
Electrical Equipment Reps is the master distributor for Innovative Technology for Texas and Oklahoma.
I.T.® Protector
Eaton has all your surge protection needs covered with the Protector! The I.T. Protector is a premier line of Surge Protective Devices designed to provide excellent protection under the harshest electrical conditions. These products are UL 1449 and UL 1283 listed and meet strict guidelines for durability and protection. They are available in peak surge current capacities from 48 kA to 400 kA per phase and offer an optional Power Event Monitor.
The I.T. Protector offers symmetrical surge current distribution and high current density capability. S.M.A.R.T. diagnostic adds an audible alarm, surge counter, and phase-loss monitor, while the Power Event Monitor can provide continuous monitoring, logging, and reporting of power quality events in real time with time- and date-stamped event recording. Eaton offers a 20-year free replacement warranty on most models, so you know you are always protected.
- ATN (Active Tracking Network) works to suppress both switching generated ringing and high-energy impulse generated transients.
- LED per phase diagnostics and dry relay contacts continuously monitor the SPD and electrical system.
- All-mode protection assures all possible transient paths to load equipment are covered.
- Encapsulation technology provides a high dielectric and ultimate protection from adverse environmental conditions.
- NEMA 4 and 4X enclosures allow for weatherproof installation in the most demanding industrial and commercial environments.
- The SPD can be mounted in any position and if necessary, the cover may be rotated 180 degrees to improve readability of the label.
I.T.® Power Event Monitor
The Power Event Monitor (PEM) is conveniently integrated into Innovative Technology surge protective devices without increasing the size of the footprint. The PEM is easily mounted on the door inside the SPD, and continuously monitors the electrical system while recording power-quality disturbances.
Communicating with the Power Event Monitor is accomplished by using Eaton's PEM Handheld or PEM PC Interface Software. Technicians can instantly access all monitored and event data by using infrared, RS-485, and wired or wireless Ethernet technologies. The PEM collects real-time data and stores up to 5000 power-quality disturbances. These records help facility managers pinpoint and correct the source of harmful power events, whether they are in a facility or at home.
- Detection, monitoring and reporting on a wide array of power quality events provides unparalleled surge protection and comprehensive system monitoring.
- Direct integration into the SPD enhances system capability without increasing footprint size.
- Smooth operation in military, marine, manufacturing and critical facility applications, allows for optimal efficiency in a wide range of environments.
- Software is quickly downloaded from our website for easy access and startup.
I.T.® Equalizer
Innovative Technology Equalizer Surge Protective Devices provide high quality transient voltage surge suppression for industrial and commercial applications. The EQX line is field proven with unsurpassed durability, and is available in a variety of configurations and current capacities.
Available in current capacities from 40 to 160 kA per phase, the Equalizer is one of the highest quality Surge Protective Devices you can find. NEMA 4 and 4X enclosures ensure that the EQX line is weatherproof in the most demanding industrial and commercial environments. The Equalizer operates in "fail-safe" mode, and is reinforced by a 10-year free replacement warranty.
- High Energy Capable Surge Paths provide unsurpassed durability on a high surge current printed circuit board design.
- Rugged steel enclosure with threaded conduit fitting and integral mounting feet offers protection in the harshest environmental conditions.
- Threshold Response Network with redundant MOV and Peak Surge Current suppresses high energy impulse transients and provides robust protection.
- Active Tracking Network (ATN) EMI/RFI Filter suppresses switching generated ringing transients with nanosecond response time and filters disruptive noise.
- Circuit Diagnostics provide indication of system status with LED indicators for each phase voltage being monitored.
- Dry relay contacts operate in a “fail-safe” mode, causing it to energize only when all phase voltages are present.
- Connecting a remote alarm to the contacts allows the alarm to activate when the relay de-energizes if one of the system phase voltages is lost.
I.T.® XT Series
I.T. XT Series Surge Protective Devices are designed for medium and low exposure level applications that require cost-effective, high quality system protection such as residential, small business, light industrial, light commercial, service entrance and branch panel protection.
The I.T. XT Series of SPDs uses Thermally Protected Metal Oxide Varistor (TPMOV) technology to provide high quality transient voltage surge suppression for light industrial, commercial and OEM applications. XT Series devices are the industries first UL1449 third edition listed products to achieve an industry best 20,000 amp nominal discharge current, and are available in configurations and current capacities of 50 or 100 kA per phase.
- Thermally Protected Metal Oxide Varistors (TPMOVs) use special low-temperature solder that sustains high surge currents and provides necessary interruption of high fault currents.
- Small size allows the device to be installed as close as possible to the equipment being protected.
- Minimizing the lead length reduces let-through voltage and enhances performance.
- NEMA 4X (IP56) polycarbonate enclosure allows for installation in the harshest environments.
I.T.® Residential
Innovative Technology Residential and Small Business Surge Protectors are designed to protect electrical and electronic loads from external electrical transients. The ac line units are designed to withstand surge currents up to 75 kA per phase and can be installed adjacent to electrical service panels.
We also offer compact residential surge suppressors for telephone and cable lines, with peak surge current capacity per phase of up to 75 kA. The combination of AC, telco and cable SPD's isolates your sensitive electronics from the damaging effects of transient voltage events. An extensive connected equipment warranty and equipment protection policy is provided with all ITRSPMIC, ITRSPMAX and ITRSPULT units.
- Ultra AC (ITRSPULT) – Easy to install and designed for indoor/outdoor protection of major appliances and electronics, with LED status indication and a surge current rating of 70 kA.
- Surge Cable (ITRSPCAB) – Modular mounting to AC protection units covers cable TV, satellite, and cable modems with a maximum surge current rating of 20 kA. Dual coaxial connections and dual isolated lines allow for added protection.
- Surge Phone (ITRSPTEL) - 4 Pair Surge Protection, quick connection terminals, and modular mounting to AC protection units provide superior protection for phone, DSL, fax, and modem with a maximum surge current rating of 80 kA.
- Weatherproof enclosures allow for installation in any outdoor environment.
- A lifetime warranty and connected equipment warranties ensure that your products are always protected.
I.T.® Critical Load
Innovative Technology Dedicated Load products provide an excellent solution to protect critical electronic equipment and provide clean power for sensitive electronic loads. They are series connected and offer flexible connection methods, compact size and superior protection for AC or DC circuits.
Eaton's Critical Load (ITHST) products are premium in-line filters with a hybrid MOV/ filter design. They are applied to protect sensitive electronic equipment from damaging voltage surges, spikes and electrical line noise by withstanding large inrush currents. Applications include Programmable Logic Controls, robotic equipment, ATMs, cash registers, alarm systems, computers, microprocessor-controlled OEM products, and automation and control devices.
- Removes the portion of disturbance that exceeds normal operating voltage during a voltage surge or electrical line noise, ensuring constant operation.
- Dual-stage series-connected protection with tracking filter, for robust surge suppression.
- Form C (dry) contacts are standard on the ITHST to allow for remote monitoring.
- Green LED illuminated for indication of power at the output terminals.
- Terminals are clearly marked for easy identification.
I.T.® Software
Power Event Monitor Handheld and PC Software is available from Eaton free of charge and provides the ability to monitor and control a SPD Power Event Monitor (PEM) using either a Personal Digital Assistant (PDA) or Personal Computer (PC) in light commercial to heavy industrial applications.
Power Event Monitor Software accesses data that is critical to the efficient operation of your power system without exposing personnel to the danger of arc flash. It monitors phase voltages in real time, displays recorded sag, swell, and surge events, saves the PEM's event history log, and configures the PEM's operating parameters. The software communicates data locally via handheld programmer, remotely via infrared to any PDA, remotely over the internet, or through MODBUS.
- Manufactured into the Protector Series SPD and shipped shelf-powered, thus requiring no installation.
- Should loss of power at the SPD occur, the PEM will remain powered, allowing for the monitoring of outage duration and return of power.
- Allows users to actually see what the SPD device is doing and to thereby identify and troubleshoot problems within the electrical distribution system.
- Tying the PEM into an Ethernet backbone allows operators to access data from anywhere, through LAN to a PDA or PC via wireless communications.
- Trending and data analysis allow for optimization of the system.
